By joining you will help ensure that we can continue to provide this service
JOIN HERE!
R69S restoration
-
- Posts: 1301
- Joined: Wed Aug 05, 2009 9:06 pm
- Has thanked: 22 times
- Been thanked: 21 times
Sonofrust,I want to say thank
I am with you when you say it makes your life a little easier and sometimes modifications are born out of necessity. For instance my re-chromed rims came out spotty from the chromers so I put those on my R60/2 rider and decided to black powder coat another set of streel rims instead of paying again for crappy chrome,and I am stoked I did it I think it looks very cool.......not to mention I took some liberties with chroming of the brake rod,and front brake arms,etc. check out the pictures
Sonofrust,again your words are much appreciated.Mahalo
In my case,once I bought that stainless steel bolt kit,that was already a deviation from stock,not to mention SS mufflers,SS spokes,SS fender bow,SS axles,SS damper knob,SS swingarm caps,SS front swingarm axle ($180.00!!),etc,etc..it already ceased being a perfect factory resto.
Since I intended to use it near the coast/beach the SS stuff was the way to go and am pleased I went this route,as well as the rims,etc.
Here are some pictures of one of the last operations of the build,which is the restoration and installation of the headlight bucket.
The first operation was installing the re-chromed key switch slider housing. Since it was rechromed the tangs were a little more tricky to bend down and I did not want to hit it with a punch & miss denting the bucket,etc.
I tool a approx1/8"diam. steel cotter pin,(which I had previously cut the straight piece off of to make a hing pin for the tool box lid on the Scorsch-Meier sport tank),and using a very fine dremel cutting wheel,made a slightly angled cut into the end and used this tool to bend the tangs and it worked great. For the switchboard it served a function of baeding the tangs down enough then with long screwdriver through the speedo cable hole, (unless you have a skinny 10-12 inch punch,I am a professional mechanic and don't have one!)tap down with a small hammer the rest of the way. The switchboard has to be held down tight,and this tool cannot get the bend down enough,however it really works well if you have to bend them up or move the tangs around to line them up.
Here is the tool I made
R69S - R60/2 - R67/2 - R51/3 - R69
-
- Posts: 1301
- Joined: Wed Aug 05, 2009 9:06 pm
- Has thanked: 22 times
- Been thanked: 21 times
Here are some pictures of the
First,here is the above mentioned tool in use
Bike coming together,front fender installed
Front wheel detail,I chromed the brake arms
I purchased a reproduction BMW speedo,however it was in kilometers,and just for fun bought a headlight restoration kit from S.Meyer,and I went ahead and installed the new (now glass instead of original plastic)lense,the only drawback was the tripmeter is now not able to reset since there is no hole for the tripmeter. This however does have the benefit of not having a way for water to leak into the speedo,like the original lense. I was so pleased how it came out that I used the original 33k speedo instead of the repro.
Here are pics of the restored headlight bucket,I used a screwdriver heated up with a electric heatgun to melt the tabs for the neutral & batt. light lense,it was tricky and I think the repro material was not as strong as the original and some "chunks" of plastic would break off if the heat was a little too high. It eventually worked out and the bucket is now together and on the bike,all that is left is to connect the wiring.
Original lense,repro ringf and reflector
Headlight installed with my "awesome" black rims \
Here she is,basically a carb rebuild/cleaning,and wiring hookup needing to be done!
Pretty stoked,almost done only 1 year and a month to the day I drug her home!
R69S - R60/2 - R67/2 - R51/3 - R69
- Darryl.Richman
- Posts: 2141
- Joined: Fri Oct 27, 2006 3:00 am
- Has thanked: 1 time
- Been thanked: 9 times
Excellent work, it looks
-
- Posts: 1301
- Joined: Wed Aug 05, 2009 9:06 pm
- Has thanked: 22 times
- Been thanked: 21 times
Thanks Darryl! I am really
R69S - R60/2 - R67/2 - R51/3 - R69
That looks superb! i was also
-
- Posts: 1301
- Joined: Wed Aug 05, 2009 9:06 pm
- Has thanked: 22 times
- Been thanked: 21 times
Hello everyone..........Here
I was quite pleased that the baking soda blasting left a nice finish and was gentle enough for carb bodies and would not clog up any internal passages.
Jamesmoc.......thank you for the kind words,it is so true however,the last 5% of the rebuild is taking the longest!
Here are some pictures of carbs!
New idle screws from S.Meyer
The NOS slotted screws I found on ebay,and I blasted the 2 jet cover bolts as well
Here are the carbs in their "home" which they have missed for over a year now
How she stands,ALMOST ready to ride.
Aloha!
R69S - R60/2 - R67/2 - R51/3 - R69
-
- Posts: 1301
- Joined: Wed Aug 05, 2009 9:06 pm
- Has thanked: 22 times
- Been thanked: 21 times
I updated this post with some
R69S - R60/2 - R67/2 - R51/3 - R69
-
- Posts: 1301
- Joined: Wed Aug 05, 2009 9:06 pm
- Has thanked: 22 times
- Been thanked: 21 times
............you did a great
R69S - R60/2 - R67/2 - R51/3 - R69