"economy switch turn signal"

[Allan.Atherton]

Adding turn signals to my R69S (along with replacing the wiring harness.) I'm looking for information on the following switch - no instructions/wiring diagram were included. After I have the new wiring harness in place I'll be better prepared to add in the signals.
http://tebogue.com/strip_mine/images/DS ... 090226.jpg

My R69US came to me with that switch. It was an eyesore and a pain to use, and I promptly put on a proper switch. The switch etc are available from Bench Mark Works -> Tech Advice -> How To Install Bar-End...
http://benchmarkworks.com/

Whichever switch you use, I made a signal wiring layout which may be of help. It is in this set of photos:
http://www.flickr.com/photos/roundel/sets/388085/

[VBMWMO]

Adding turn signals to my R69S (along with replacing the wiring harness.)

I'm looking for information on the following switch - no instructions/wiring diagram were included. After I have the new wiring harness in place I'll be better prepared to add in the signals. I can poke around with meter I have - that I am also getting familiar with. (also) The switch looks like it might work as a headlamp flasher/horn switch assembly.

Purchased from http://www.bmwhucky.com/006961.html - Hucky's Spare Parts - 61 ELECTRIC - 61 96 0 000 003 - economy switch turn signal - $19.

http://tebogue.com/strip_mine/images/DS ... 090226.jpg

http://tebogue.com/strip_mine/images/DS ... 090226.jpg

http://tebogue.com/strip_mine/images/DS ... 090226.jpg

Thanks. Tim (by the way, I have a battery - lead/acid - it's very nice)