What was happening when things "went wrong"?
Just curious...what two wires (colors or terminals) did you reverse? I take it this is not a Euro spec bike...
I doubt you can get anything at the local car store for the ignition switch. If the problem is somewhere else, such as a relay or fuse, you can probably find a reasonable substitute.
Kurt in S.A.
If you like our site, please consider joining our club!
By joining you will help ensure that we can continue to provide this service
JOIN HERE!
By joining you will help ensure that we can continue to provide this service
JOIN HERE!
Iginition Switch 84' R80RT
-
schrader7032
- Posts: 9063
- Joined: Fri Oct 27, 2006 3:00 am
- Location: San Antonio, TX
- Has thanked: 3 times
- Been thanked: 36 times
Iginition Switch 84' R80RT
Kurt in S.A.
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.
Ignition Switch
Dealer changed two wires so I would have high beam and running light on the rear. Believe he changed position 56 & 58. It's the switch. This switch has to be used on another vehicle or generator?
Iginition Switch 84' R80RT
Something went wrong inside the ignition switch. I had to reverse two wires to get the headlight/tail light working properly. Is there a repair for this switch or can a replacement be obtained from my local auto parts store.
Dedicated to the Preservation of Classic and Antique BMW Motorcycles.