1984 R100RS. Any idea where to source a set of the chrome engine protection bars for my bike. The fairing has the holes already in it, I believe the original kit part # was 4671 2 301834.
Any help would be greatly appreciated.
If you like our site, please consider joining our club!
By joining you will help ensure that we can continue to provide this service
JOIN HERE!
By joining you will help ensure that we can continue to provide this service
JOIN HERE!
Engine protection bars
-
srankin
- Posts: 1085
- Joined: Fri Jul 14, 2017 8:45 pm
- Location: Spencerport, NY USA
- Been thanked: 21 times
Re: Engine protection bars
Boxer Two Valve also carries them. I think mine came from EME however, just don't remember for sure.
Just a heads up, if you have been using the straight oil filters, (maybe not as you have a faired bike) you will most likely have to switch to the hinged filters after installing the bars. One of the mounts goes to an engine mount on the frame and gets in the way of the straight filter. (oh, long ago before I installed the bars, I had notched the lower fairing to make filter changes easier, LOL then I go and install the bars and go back to less easy). St.
Just a heads up, if you have been using the straight oil filters, (maybe not as you have a faired bike) you will most likely have to switch to the hinged filters after installing the bars. One of the mounts goes to an engine mount on the frame and gets in the way of the straight filter. (oh, long ago before I installed the bars, I had notched the lower fairing to make filter changes easier, LOL then I go and install the bars and go back to less easy). St.
Owner of a 84, R80RT and 78, R100RS