By joining you will help ensure that we can continue to provide this service
JOIN HERE!
R50/2 Bing Carb Slide Setting
R50/2 Bing Carb Slide Setting
I own a 1963 R50/2 with rebuilt Bing carbs 131&132. Carbs are setup to the Bing Carb Spec Sheet. Main 135, Needle 1308, Idle Jet 35, Jet Needle 255, Clip Position 3 from top, Idle Mix Setting 2 out (start point). My question is what is a good start point for the slide adjusters?
Thanks, Gary
- schrader7032
- Posts: 9086
- Joined: Fri Oct 27, 2006 3:00 am
- Location: San Antonio, TX
- Has thanked: 3 times
- Been thanked: 40 times
Re: R50/2 Bing Carb Slide Setting
Kurt
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.
- wa1nca
- Posts: 1239
- Joined: Thu Sep 27, 2012 5:15 pm
- Location: Ashfield Ma
- Has thanked: 13 times
- Been thanked: 18 times
Re: R50/2 Bing Carb Slide Setting
Do you mean the starting point for the slid at idle
If so, adjust the idle screw up so the slid raises just a little on both sides and then do a final adjustment after the bike is running and warmed up
54 R51/3, 55 R50/Velorex 560 sidecar, 64 R27, 68 R69US, 75 R75/6
Ashfield, Ma
USA