When test mounting my horn, I see that the stacked 'spring' bracket should mount on the front side of the frame bracket, allowing the bevel on the frame mount to dictate the angle of the bracket. My problem is that the bracket is too wide to nestle down into the bevel and bolt on correctly. It is the original bracket and horn, but was part of the bike-in-a-box, so was not mounted when I got it. What am I missing? It does not seem correct to mount the bracket on the back side of the frame bracket, and I really don't want to modify the bracket to fit on the front. Thanks.
Dave
If you like our site, please consider joining our club!
By joining you will help ensure that we can continue to provide this service
JOIN HERE!
By joining you will help ensure that we can continue to provide this service
JOIN HERE!
Bosch horn repair
Sorry, I took mine off about
Sorry, I took mine off about 3 yrs ago and no pictures. maybe we both will learn.
twocams
twocams
Twocams
92 R100RT/69 R69S
2004 Aprilia Atlantic 500cc single cylinder Scooter
83 Honda V65 Magna, fastest production bike in1983
2015 Can Am Spider SE6 1,688 miles
2018 Moto Guzzi V711 Special
92 R100RT/69 R69S
2004 Aprilia Atlantic 500cc single cylinder Scooter
83 Honda V65 Magna, fastest production bike in1983
2015 Can Am Spider SE6 1,688 miles
2018 Moto Guzzi V711 Special