By joining you will help ensure that we can continue to provide this service
JOIN HERE!
Hodakaguy's R51/3 & Steib LS200 Thread.
Hodakaguy's R51/3 & Steib LS200 Thread.
Years ago.....waaaaaay way back in the day I owned a 1963 BMW R69S with a Steib LS200 hack. I purchased it from the second owner who had owned it since 1962, all of his kids grew up riding in the hack. I rode the wheels off that bike and absolutly loved it! I eventually sold it to put my wife through school and have always missed that setup ever since.
Fast forward to this past Sunday and I got the opprtunity to purchase a 1953 BMW R51/3 complete with a 1952 Steib LS200 Hack. The 51/3 is another bike I've always wanted to own, I absolutely love the art deco lines and flared front fender....Instant love! The owner has owned this bike for the past 56 Years! The guy he purchsed it from was using it for a hill climb bike and had knobby tires installed! He added the Steib in the 80's and installed sidecar gearing in the final drive (he included two spare final drives with solo gearing in the sale). We had a great time swapping stories and chatting about vintage BMW's.
I test rode the bike, looked over the pile of spare parts that was included in the sale and we struck a deal! The bike isn't a show bike and has lots of Patina....but is still presentable as is and I think it looks great as a survivor. Tank is in original paint, fenders are an old repaint. Frame and engine numbers match. The engine ran great although the rockers sound loose and noisy on the right jug. A full tune up and thorough going over is in order before any further playing Is to be had.
Kiddo loves the setup, it's a tight fit but he can get into the tiny hack He can't wait to cruise around and hit yard sales in the setup. My plan is to clean it up the best I can, get it mechanically sound and enjoy it!
My wife and I on my R69S 25 years ago.
The new ride, at the previous owners house. The fold down top and windshield is pretty cool, I didn't have either of those on my old setup.
Had to snap a photo of the previous owner and I together with his baby before I left.
On the trailer for the ride home.
I removed the top and windshield from the hack to prevent wear on the 5hr freeway ride home.
Just after arriving home, kiddo had to try on the hack for size .
More fun to come....
Hodakaguy
Re: Hodakaguy's R51/3 & Steib LS200 Thread.
Lots of good spare parts including a NOS set of BMW pistons, two solo final drives, carbs, and lots of new and used bits. Unfortunatly the spare disassembled transmission was stored in the basement and sat in a lot of water causing corossion.
Parts!
Newspaper clipping and original bill of sale.
Trans rebuild receipt
More parts
Hodakaguy
Re: Hodakaguy's R51/3 & Steib LS200 Thread.
Hodakaguy
Re: Hodakaguy's R51/3 & Steib LS200 Thread.
Hodakaguy
Re: Hodakaguy's R51/3 & Steib LS200 Thread.
Hodakapops and I on our three wheel steeds
Heading out Friday morning for a solo ride to hit some yard sales, bike had a vibration when turning right. Suspected a wheel bearing so headed back to the house....yep, some play in the rear wheel bearings. New wheel bearings all around on order...no more riding this weekend. Such is the life with a vintage bike :freaky
Hodakaguy
Re: Hodakaguy's R51/3 & Steib LS200 Thread.
Parts in hand
Removing the rear wheel and installing the bearings. Got busy and didn't take any pics of the process.
Old bearings in the rear wheel were way past ready to be changed.
Working on the front.
After swapping out the front bearings with the new sealed units (Fronts were in way better cond) I disassembled the brakes and cleaned lubricated everything. Shoes were in great cond and ready for miles to come.
The rest of my parts got delayed in shipping, more work next weekend.
Hodakaguy
Re: Hodakaguy's R51/3 & Steib LS200 Thread.
Upon receiving the new front brake cable I realized the exposed portion of the cable was shorter and I couldn't get it to fit between the two brake arms on the backing plate. Hmmm....I want to ride this weekend so that won't do! A little careful work with the Dremel tool and the cable is now the right length.
Old vs New.
Easy does it.
One longer cable coming up.
Better air filtration. The early BMW's use a cleanable horse hair filter media that you wash out and re-oil. The media in mine looked pretty nasty and didn't clean up well. This setup is great for keeping small barn yard animals out of your engine, fine dust not so much. Time to fix this!
Inside the air filter
Pry out the upper screen and remove the filter media.
I'll be installing oiled foam in place of the original filter media. I ordered two sheets of Uni-filter Universal filter foam in both coarse and fine.
After cutting out some new filters I oiled them up with some Bel-Ray filter oil (good stuff!).
The coarse filter goes back in first, then the fine.
The new foam filters are pretty secure and probably doesnt need anything more to retain them in place.....but better safe than sorry. Instead of messing with re-installing the upper screen, which is a pain to remove, I decided to make a quick release retainer. I took a piece of stainless steel TIG rod and bent it into shape to use as a spring clip. Now it's super easy to remove for future cleaning/maint.
This mod offers WAY better air filtration and appears completely stock from the outside. Perfect.
New Norris points installed along with a new advance unit.
Setting the new throttle cables and balancing the carburators.
Out with the old high bars and high mirror. Here's the last pic of the original setup.
I'm installing Euro sidecar bars as I love the lower sleek look of this setup The sidecar bars are shaped like the original Euro solo bars but are a tad wider for better leverage when using a sidecar.
And installed. I also installed a pair of Albert headlight mirrors to add to the low profile look.
And back out in the sun.
Hodakaguy
Re: Hodakaguy's R51/3 & Steib LS200 Thread.
Time to change oil again and check inside the pan. This is my second oil change so far as I'm flushing the engine a bit. Oil drained nice and clean, no metal bits. Pan had a light film in the bottom that was wiped clean, Oil pickup looked clean with just a bit if lint/rag material stuck to the middle. So far so good.
Hodakaguy
Re: Hodakaguy's R51/3 & Steib LS200 Thread.
The power piston is out of a 1956 Ingersoll Rand KVS industrial engine/compressor unit. The unit runs on natural gas and is used to compress natural gas on a gas pipeline. The engine produces 1000 hp at 330 rpm, single turbo and the bare piston weights 400 lbs. They are a kick to work on!
The piston works great as a vice stand
Rode over to a friend's house yesterday to help her work on her motorcycle. Ally recently purchased a Kawasaki Z650 and is wanting to learn how to perform her own maintinace & modifications. She ordered a fender eliminator kit and installed it last night with a little supervision.....way cool!
Almost dark on the ride home, I love the vintage glow of the 6V headlight......Back when measuring light output by candle power was an accurate comparison
Hodakaguy