By joining you will help ensure that we can continue to provide this service
JOIN HERE!
EXHAUST NUT SPANNER DXF ?
EXHAUST NUT SPANNER DXF ?
Would anyone have a DXF or any other format file for an exhaust nut spanner?
Thanks
Richard
- srankin
- Posts: 1103
- Joined: Fri Jul 14, 2017 8:45 pm
- Location: Spencerport, NY USA
- Been thanked: 22 times
Re: EXHAUST NUT SPANNER DXF ?
Re: EXHAUST NUT SPANNER DXF ?
Yes I see that I can buy one.
But with access to Laser cutters and a Waterjet I really should make one myself.
I will draw up a spanner and post the files on here.
Just got busy at work...end of financial year and all that.
Thanks
Richard
- srankin
- Posts: 1103
- Joined: Fri Jul 14, 2017 8:45 pm
- Location: Spencerport, NY USA
- Been thanked: 22 times
Re: EXHAUST NUT SPANNER DXF ?
- schrader7032
- Posts: 9086
- Joined: Fri Oct 27, 2006 3:00 am
- Location: San Antonio, TX
- Has thanked: 3 times
- Been thanked: 40 times
Re: EXHAUST NUT SPANNER DXF ?
There is another one that is used with a standard 3/8" socket wrench. The part that engages is just a flat piece. Duane shows it here on this page:
https://w6rec.com/exhaust-pipes/
I'm not sure if this flat one is better or if it engages enough of the fins. Certainly, it has far fewer "teeth" than the one with the built in handle.
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.
Re: EXHAUST NUT SPANNER DXF ?
I finally found time to draw and make the Ex Nut spanner. But I cannot attach DXF or DWG files.
If anyone wants a copy then just PM me.
Thanks
Richard
- schrader7032
- Posts: 9086
- Joined: Fri Oct 27, 2006 3:00 am
- Location: San Antonio, TX
- Has thanked: 3 times
- Been thanked: 40 times
Re: EXHAUST NUT SPANNER DXF ?
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.
Re: EXHAUST NUT SPANNER DXF ?
I sure am going to miss the Waterjet cutter when I retire to my bit of land.
Back to the grinder and hacksaw
Richard
Re: EXHAUST NUT SPANNER DXF ?
- srankin
- Posts: 1103
- Joined: Fri Jul 14, 2017 8:45 pm
- Location: Spencerport, NY USA
- Been thanked: 22 times
Re: EXHAUST NUT SPANNER DXF ?
You did a nice job. St.