By joining you will help ensure that we can continue to provide this service
JOIN HERE!
Torque Bolts on r/60
- schrader7032
- Posts: 9065
- Joined: Fri Oct 27, 2006 3:00 am
- Location: San Antonio, TX
- Has thanked: 3 times
- Been thanked: 36 times
Torque Bolts on r/60
- oil drain plug: 15 ft-lbs
- cylinder heads: 25 ft-lbs
- gearbox cover nuts: 10 ft-lbs
- generator bolt: 14 ft-lbs
- magneto bolt: 14 ft-lbs
- drive shaft coupling nut: 90 ft-lbs
- flywheel cap screw: 150 ft-lbs
- Drive shaft drain/fill 10 ft-lbs (???)
- Axle spindle nuts: 25 ft-lbs
- General torque guidelines
- M3 10 in-lbs
- M4 20 in-lbs
- M5 40 in-lbs
- M6 (SW10) 70 in-lbs
- M8 (SW13) 14 ft-lbs
- M10 (SW15) 29 ft-lbs
- M12 (SW19) 49 ft-lbs
- M14 79 ft-lbs
I have the multi-language workshop manual, and here's what if lists. The value of mkp is kilopound meters. 1 mkp is 7.233 ft-lbs.
cylinder head bolts - 3.5
flywheel retaining screw - 22
6 hexagonal gearbox cover nuts - 1.7
oil drain plug on final drive - 2.3
allen head screws for shifting fork retainment - 2.3
drive pinion securing nut in final drive - 11
grooved M16x1.5 for fastening coupling flange to gearbox output shaft - 22
with old execution (grooved nut M14x1.5) - 12
hex nut for fastening coupling cup to drive shaft (with woodruff key) - 13
hex nut for fastening coupling cup to drive shaft (without woodruff key, R50 starting frame 643190; R60 starting frame 1811495; R69S starting frame 662145) - 24
generator armature on crankshaft - 2
ignition magneto rotor on camshaft - 2
Check multiple sources before application of torque and try and use common sense.
Kurt in S.A.
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.
-
- Posts: 1
- Joined: Fri Jan 11, 2008 8:44 am