Hello,
Found a R90S that appears to need a few things before it can be ridden across country. It has leaking push-rod tubes and a leaking master brake cylinder. Would appreciate the name of a good Airhead facility in the Bay Area(CA) for these repairs. These would have to be completed "on the fly" so to speak, as I would fly into Oakland, ride the motor to the repair shop, stay locally until it was completed (one day??) and ride home.
Any thoughts or suggestions are greatly appreciated.
Thanks in advance,
Motorman
If you like our site, please consider joining our club!
By joining you will help ensure that we can continue to provide this service
JOIN HERE!
By joining you will help ensure that we can continue to provide this service
JOIN HERE!
R90S Repair Estimates???
-
schrader7032
- Posts: 9065
- Joined: Fri Oct 27, 2006 3:00 am
- Location: San Antonio, TX
- Has thanked: 3 times
- Been thanked: 36 times
I'd check with Ted Porter at
I'd check with Ted Porter at the Beemershop - http://www.beemershop.com. It's in Scotts Valley...not exactly Oakland.
Kurt in S.A.
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.
-
Darryl.Richman
- Posts: 2140
- Joined: Fri Oct 27, 2006 3:00 am
- Has thanked: 1 time
- Been thanked: 9 times
Beemershop
The Beemershop is about 80 miles from Oakland, pretty much direct by freeway (I-880 and CA-17). A little closer is San Jose BMW, which has a long history with Airheads.
Good luck!
Good luck!
--Darryl Richman