In case you have not figured it out yet, here the way it was hooked up on my R60/5, before I took it apart:
A + B: Handlebar control switches
C: Turn signals
D: Tach cable
E: Speedo cable
F: Main Harness
Hope that helps...
If you like our site, please consider joining our club!
By joining you will help ensure that we can continue to provide this service
JOIN HERE!
By joining you will help ensure that we can continue to provide this service
JOIN HERE!
R75/5 Headlight Bucket "holes"
R75/5 Headlight Bucket "holes"
Looking for some help - i'm putting together a R75/5 parts bike. I'm ok with the wiring but I'd like some direction on the correct headlight bucket "holes" to use for passing the speedo cable, tach cable, main harness, front turn signals etc.
This bike was missing some parts and a few of the holes in the bucket were empty, within nothing passing through them.
I've included a photo and I've labeled the holes A - F. If someone would be kind enough to spend ten minutes or so looking at their /5 and then let me know what wires/cables pass through hole A, B ... F, I'd greatly appreciate it!.
Thank you in advance for your assistance.
This bike was missing some parts and a few of the holes in the bucket were empty, within nothing passing through them.
I've included a photo and I've labeled the holes A - F. If someone would be kind enough to spend ten minutes or so looking at their /5 and then let me know what wires/cables pass through hole A, B ... F, I'd greatly appreciate it!.
Thank you in advance for your assistance.
Dedicated to the Preservation of Classic and Antique BMW Motorcycles.