I used Permatex Super Weatherstrip Adhesive. It's yellowish in color...also known as gorilla snot. Clean both surfaces thoroughly. Follow the directions on the tube. And be sure and get the badge positioned correctly. If they're a bit too far to the rear, you'll have trouble getting off the air cleaner covers. DAMHIK.
Kurt in S.A.
If you like our site, please consider joining our club!
By joining you will help ensure that we can continue to provide this service
JOIN HERE!
By joining you will help ensure that we can continue to provide this service
JOIN HERE!
Proper Glue to afix name plate on engine block
-
schrader7032
- Posts: 9063
- Joined: Fri Oct 27, 2006 3:00 am
- Location: San Antonio, TX
- Has thanked: 3 times
- Been thanked: 36 times
Proper Glue to afix name plate on engine block
Kurt in S.A.
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.
Proper Glue to afix name plate on engine block
What is the proper glue used to re-afix the name plate on the engine block?
Its the name plate that says BMW R75/5 on the engine block.
Cheers
Its the name plate that says BMW R75/5 on the engine block.
Cheers
Dedicated to the Preservation of Classic and Antique BMW Motorcycles.