By joining you will help ensure that we can continue to provide this service
JOIN HERE!
R50/2 Reassembly Help
- NoahRodenbeek
- Posts: 17
- Joined: Tue May 30, 2017 6:21 pm
R50/2 Reassembly Help
I kind of thought the "Building a Roller" chapter of the Barrington manual was going to keep going, but it was just for the front and rear fenders. There are very thorough chapters on reassembling all the remaining components (engine block, carburetors, wiring harnesses, etc), but I'm not certain what order I should be doing them in. Does it even matter?
I'm thrilled to be as far along as I am and my confidence is still really high, I just need an ordered To-Do list to get me to the finish line.
Thank you!
Engine
- Attachments
-
- e9d820cd-0fa7-4962-a85e-f1cf2fc125d1.jpeg (1.7 MiB) Viewed 3206 times
- schrader7032
- Posts: 9057
- Joined: Fri Oct 27, 2006 3:00 am
- Location: San Antonio, TX
- Has thanked: 3 times
- Been thanked: 36 times
I would also start at the
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.
- wa1nca
- Posts: 1234
- Joined: Thu Sep 27, 2012 5:15 pm
- Location: Ashfield Ma
- Has thanked: 13 times
- Been thanked: 18 times
engine install
Tommy
- Attachments
-
- dsc05033.jpg (135.63 KiB) Viewed 3206 times
-
- dsc05032.jpg (132.82 KiB) Viewed 3206 times
-
- dsc05011.jpg (131.06 KiB) Viewed 3206 times
54 R51/3, 55 R50/Velorex 560 sidecar, 64 R27, 68 R69US, 75 R75/6
Ashfield, Ma
USA
Before you do anything else,
Bill
Barre, MA USA
1963 R60/2 w/ 1955 Steib S500
1973 R75/5
Before you do anything else,
Bill
Barre, MA USA
1963 R60/2 w/ 1955 Steib S500
1973 R75/5
- NoahRodenbeek
- Posts: 17
- Joined: Tue May 30, 2017 6:21 pm
Handlebars on and I'll start
-
- Posts: 12
- Joined: Tue Jan 27, 2009 4:28 pm