Electrical Issues!!

Post Reply
J-Sin
Posts: 16
Joined: Thu Jul 01, 2010 11:04 am

Electrical Issues!!

Post by J-Sin »

On my way to work the other day a guy pulled up next to me and told me my tail light was not working. Later that night randomly my headlight stopped working and when I got it to my garage I pulled the key and it continued to run. It seems to me random. After messing around with the wires I got the head light and tail light to work but the neutral light and brake light is not working. And again after pulling the key it remained running. R50/2. Any help would be greatly appreciated!

User avatar
RainyRider
Posts: 41
Joined: Fri Jun 12, 2009 12:25 am

Bad/broken connection(s) on

Post by RainyRider »

Bad/broken connection(s) on the electrical board in the headlight....maybe?
Just a thought.

Good luck,

fred



User avatar
Micha
Posts: 485
Joined: Fri Oct 12, 2007 2:24 am
Location: Israel

Hi J-Sin, While overhauling,

Post by Micha »

Hi J-Sin,
While overhauling, I had a new electrical board fitted inside my headlamp that showed the same problems: The solution was a lot of WD40 inside key hole and when stopping the machine – pulling the key out quickly, at once.
The electrical boards is (maybe?) the only part on that bike that can be considered as not reliable or not successfully planed or built…
Best from Israel – Micha.
Michael Steinmann
R51/3 1952
Engine Nr. 529466

J-Sin
Posts: 16
Joined: Thu Jul 01, 2010 11:04 am

Succsess!!

Post by J-Sin »

Thanks Fred and Micha! I purchased a new board and ignition lock from Vech and installed the parts in time to make it to bike night last night! :)

Post Reply