After doing a bit of research, I soldered a primitive 6v to 5v USB Charger, connecting it to the 15/54 terminal in the switch board of the headlight.
The device is nothing more than a regulator, heat, sink and a USB female adapter. So far so good.
If you like our site, please consider joining our club!
By joining you will help ensure that we can continue to provide this service
JOIN HERE!
By joining you will help ensure that we can continue to provide this service
JOIN HERE!
USB Charger for 6v
USB Charger for 6v
So there are plenty of adapters and plugs for 12 volt systems to charge a USB device like a phone or GPS navigation unit but none that I could find for 6v.
After doing a bit of research, I soldered a primitive 6v to 5v USB Charger, connecting it to the 15/54 terminal in the switch board of the headlight.
The device is nothing more than a regulator, heat, sink and a USB female adapter. So far so good.
After doing a bit of research, I soldered a primitive 6v to 5v USB Charger, connecting it to the 15/54 terminal in the switch board of the headlight.
The device is nothing more than a regulator, heat, sink and a USB female adapter. So far so good.
'62 R69S
'65 R50/2
'76 R90/6
'65 R50/2
'76 R90/6
-
schrader7032
- Posts: 9065
- Joined: Fri Oct 27, 2006 3:00 am
- Location: San Antonio, TX
- Has thanked: 3 times
- Been thanked: 36 times
I have an old universal
I have an old universal electronics charger with a switch on the front for 6, 9, or 12 volts. This is what I use for my 6v batteries. Probably could find one at a garage sale or flea market.
Kurt in S.A.
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.