By joining you will help ensure that we can continue to provide this service
JOIN HERE!
R50/2 Cylinder Head Exhaust Manifold threads
R50/2 Cylinder Head Exhaust Manifold threads
I have recently purchase a 1969 R50/2 and is busy with a complete Frame up Restoration. I have removed the Engine and have realized the Threads to the Exhaust are almost completely striped away.
Do you guys know it the Threads and be repaired or will I have to prepare myself for a new set of Head.
Do note I stay in South Africa and we don’t have access to all the specialist you guys have over there in the States and Europe.
Thanks
Carl S.A
- schrader7032
- Posts: 9065
- Joined: Fri Oct 27, 2006 3:00 am
- Location: San Antonio, TX
- Has thanked: 3 times
- Been thanked: 36 times
Thread Fix
Yes they can be fixed. I've read about three solutions: cut off the entire spigot and TIG weld on a new threaded stub; machine off the threads and then shrinking/pinning on a threaded sleeve; or TIG welding the damaged area to build up new material and then cut new threads. I think the latter is the best approach and the sleeve is probably not so good.
Here's another possibility...not sure what kind of sizes it comes in and if it would work on an R50/2 head.
http://www.price.gmxhome.de/sternmutterersatz.html
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.
-
- Posts: 1301
- Joined: Wed Aug 05, 2009 9:06 pm
- Has thanked: 21 times
- Been thanked: 21 times
You can get someone to Tig
R69S - R60/2 - R67/2 - R51/3 - R69
exhaust flange gone - repair source
spigot repair - contact their service dept. The heads
will look like new when they return.
And use only new exhaust rings of course.
http://www.bobsbmw.com/catalog/index.html
Hi Guys Thanks for your Help
Thanks for your Help I have manged to track down somebody who will repair the Threads.