By joining you will help ensure that we can continue to provide this service
JOIN HERE!
Reynolds Ride Off Stand
Reynolds Ride Off Stand
Any suggestions on a source for the mounting hardware? As an alternative I have access to a machine shop where I can make the components if I can get the specifications for the half moon clips and spring mounts.
I am perfectly happy with the stock center stand but at 73 years of age thought I’d give the ride off a try knowing well the pros and cons of the stand.
- schrader7032
- Posts: 9086
- Joined: Fri Oct 27, 2006 3:00 am
- Location: San Antonio, TX
- Has thanked: 3 times
- Been thanked: 40 times
Re: Reynolds Ride Off Stand
As for parts, I'd say you'll just have to keep your eye on fleaby and craigslist. There is a software tool that can search all of craigslist, not just one city at a time. Some info here on the stands:
https://w6rec.com/reynolds-ride-off-stand/
https://w6rec.com/reynolds-bmw-motorcycle-accessories/
You probably need the model R320 for more info.
Here's a picture of the parts for my stand parts. The grid paper is 1/4-inch squares.
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.
Re: Reynolds Ride Off Stand
I agree about the varied opinions on the ride off stand but I liked mine when I had it on my first /6. I have since owned two more R90/6’s, a R100 RT, K100 RT, a R1100 GS and now a R90S.
I’ll keep searching but should be able to fabricate the parts based on the specs in your picture. I also think I have a place that may be able to make the springs. I’ll let you know.