By joining you will help ensure that we can continue to provide this service
JOIN HERE!
R90 ? parts Info
-
- Posts: 1
- Joined: Sat Jul 16, 2022 12:25 am
R90 ? parts Info
The parts in ? do they fit together, or am i missing something,
The parts were removed from the bike when running.
Bike R90s, ( by frame and engine numbers ) yes that is doubtful, had been converted (as the rest of the bike to non standard ) with a oil cooler.
So I am going back to standard.
The oil filter tube is only 124mm total length ??
Oil feed pipe seems to manufactured by ??
Oil filter cover seems to fit alignment bolts but is a ? as well. Not really sure if this cover was on the bike at all ?
Wil be great full on any ideas,
cheers, Huey.
- srankin
- Posts: 1103
- Joined: Fri Jul 14, 2017 8:45 pm
- Location: Spencerport, NY USA
- Been thanked: 22 times
Re: R90 ? parts Info
At this time, I suggest you go to one of the online dealer's website parts microfiche and have a look and comparison of part numbers for your bike between oil cooler equipped and non.
Looking at the parts you have laid out in the picture I don't see anything strange. Don't take my word for it but as far as I know, the filter canister housing and cap look like the proper parts as does the cover for the outside.
Good luck. St.
- schrader7032
- Posts: 9086
- Joined: Fri Oct 27, 2006 3:00 am
- Location: San Antonio, TX
- Has thanked: 3 times
- Been thanked: 40 times
Re: R90 ? parts Info
Snowbum has a lengthy article on the oiling system, filters, and thermostats here:
https://bmwmotorcycletech.info/Oil.htm
I think the important stuff begins paragraph 25.
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.
-
- Posts: 2
- Joined: Fri Apr 05, 2024 11:35 pm
Re: R90 ? parts Info
that's not my neighbor