By joining you will help ensure that we can continue to provide this service
JOIN HERE!
R26 and R27 transmission removal question
R26 and R27 transmission removal question
Question: is there room to sneak the transmission back far enough to get it past the engine-trans mounting studs without shifting the engine forward ?
if not, can I separate the engine and transmission then take one out at a time ? which comes out first, engine or trans ?
any advice will be greatly appreciated plus save some skin on my knuckles.
Grant MacNeill
The Twelfth Fret Guitar Shop, Toronto
- vechorik1373
- Posts: 268
- Joined: Fri Oct 27, 2006 3:00 am
- Been thanked: 26 times
Re: R26 and R27 transmission removal question
In order to leave the engine in place and remove the transmission, you will have to remove the rear fender, rear wheel, the battery box and air box, and the swing arm.
Those individual components weigh a lot less each than the engine and trans!
Technical Adviser, Former owner, Bench Mark Works
662 312 2838 cell 9 am to 4pm CST PLEASE!
Re: R26 and R27 transmission removal question
Regards,
Grant MacNeill ( your old customer in Toronto with the guitar shop)