By joining you will help ensure that we can continue to provide this service
JOIN HERE!
Re: [R90SWORLDNET] electrical troubleshooting for an R90S
Re: [R90SWORLDNET] electrical troubleshooting for an R90S
Check to see if there is 12 volts at the big heavy red wire on the diode board. It is on the lower left as sitting on the bike. This come straight from the battery. Check this to anywhere on the engine case for the ground. I’m wondering if you arced a connector inside one of the main ground wire ends. This being the wire from the battery to the transmission. Also recheck the battery connections for clean and tight. You had two turns of the starter motor which makes me think your short pulled alot of amp through an old crimp terminal.
Richard Chawes