By joining you will help ensure that we can continue to provide this service
JOIN HERE!
Whiny tach on 1976 R90/6
Whiny tach on 1976 R90/6
Recently I've noticed the tach starting to whine/chatter at times. I loosened the cable and lubed it, but I think it's in the head. If I loosen the nut on the top of the cable where it enters the tach housing the noise goes away.
A couple years ago I pulled the assembly to do a minor repair on the speedo which required a little epoxy where some of my mileage numbers stopped rotating. That was fairly simple.
Before I pull apart the tach I was wondering if anyone had any advise.
I'm guessing the lube is dried up and maybe just needs some attention.
Re: [R90SWORLDNET] Whiny tach on 1976 R90/6
into the top of the cable after disconnecting from the speedo. The "correct
police" will tell you not to lubricate the cable, but it has worked for me
for over 45 yrs of airhead riding.
On Wed, Mar 10, 2021, 3:28 PM DAVID LEMAIRE via groups.io <dslemaire=
aol.com@groups.io> wrote:
> I have a 1976 R90/6 with 40,000 miles.
>
> Recently I've noticed the tach starting to whine/chatter at times. I
> loosened the cable and lubed it, but I think it's in the head. If I loosen
> the nut on the top of the cable where it enters the tach housing the noise
> goes away.
>
> A couple years ago I pulled the assembly to do a minor repair on the
> speedo which required a little epoxy where some of my mileage numbers
> stopped rotating. That was fairly simple.
>
> Before I pull apart the tach I was wondering if anyone had any advise.
>
> I'm guessing the lube is dried up and maybe just needs some attention.
>
>