By joining you will help ensure that we can continue to provide this service
JOIN HERE!
BMW R35 (1938) resurrection
- luca.stere
- Posts: 92
- Joined: Thu May 23, 2013 4:11 am
The flywheel is ok but is
- Attachments
-
- bmw-r35_14.jpg (166.94 KiB) Viewed 4264 times
-
- bmw-r35_13.jpg (454.14 KiB) Viewed 4264 times
-
- bmw-r35_12.jpg (314.92 KiB) Viewed 4264 times
-
- bmw-r35_11.jpg (475.85 KiB) Viewed 4264 times
- luca.stere
- Posts: 92
- Joined: Thu May 23, 2013 4:11 am
The presure plate, the
- Attachments
-
- bmw-r35_20.jpg (327.89 KiB) Viewed 4264 times
-
- bmw-r35_19.jpg (353.1 KiB) Viewed 4264 times
-
- bmw-r35_18.jpg (302.31 KiB) Viewed 4264 times
-
- bmw-r35_15.jpg (535.71 KiB) Viewed 4264 times
-
- bmw-r35_16.jpg (466.79 KiB) Viewed 4264 times
- luca.stere
- Posts: 92
- Joined: Thu May 23, 2013 4:11 am
The camshaft, timing chain,
- Attachments
-
- bmw-r35_30.jpg (362.98 KiB) Viewed 4264 times
-
- bmw-r35_27.jpg (418.76 KiB) Viewed 4264 times
-
- bmw-r35_25.jpg (193.78 KiB) Viewed 4264 times
-
- bmw-r35_26.jpg (339.74 KiB) Viewed 4264 times
- luca.stere
- Posts: 92
- Joined: Thu May 23, 2013 4:11 am
The oil pump:
- Attachments
-
- bmw-r35_34.jpg (243.54 KiB) Viewed 4264 times
-
- bmw-r35_29.jpg (154.9 KiB) Viewed 4264 times
-
- bmw-r35_28.jpg (412.64 KiB) Viewed 4264 times
- luca.stere
- Posts: 92
- Joined: Thu May 23, 2013 4:11 am
Timing gear cover, this is
- Attachments
-
- bmw-r35_40.jpg (338.41 KiB) Viewed 4264 times
-
- bmw-r35_39.jpg (287.89 KiB) Viewed 4264 times
-
- bmw-r35_38.jpg (390.87 KiB) Viewed 4264 times
-
- bmw-r35_37.jpg (327.73 KiB) Viewed 4264 times
- luca.stere
- Posts: 92
- Joined: Thu May 23, 2013 4:11 am
- luca.stere
- Posts: 92
- Joined: Thu May 23, 2013 4:11 am
- luca.stere
- Posts: 92
- Joined: Thu May 23, 2013 4:11 am
This is the frame sandblasted
- Attachments
-
- frame-bmw-r35_3.jpg (366.06 KiB) Viewed 4264 times
-
- frame-bmw-r35_2.jpg (417.26 KiB) Viewed 4264 times
-
- frame-bmw-r35_1.jpg (427.82 KiB) Viewed 4264 times
- luca.stere
- Posts: 92
- Joined: Thu May 23, 2013 4:11 am
Cylinder
It was bored to a bigger diameter (75mm) instead of 73mm standard diameter. We did that in order to recover this old and original cylinder and we will use a modern VW engine piston with Goetze rings. The main advantages are that the cylinder have an old material which is becoming better with the time and the modern piston and rings have better materials and low friction technology compared to the old ones or some shady aftermarket parts that I have seen on internet.
- Attachments
-
- 20200607_140014.jpg (254.82 KiB) Viewed 4264 times
-
- 20200607_105141.jpg (234.26 KiB) Viewed 4264 times
-
- 20200607_113631.jpg (493.73 KiB) Viewed 4264 times