By joining you will help ensure that we can continue to provide this service
JOIN HERE!
Push rod tube sizes and compatibility
Push rod tube sizes and compatibility
Anyone know if you installing a pre 75 cylinder with 16mm pushrod tubes, on an existing18mm pushrod tube setup, would work?
Are the pushrods compatible? Would I need to swap the pushrods for another part if I install the 16mm cylinder on?
The current cylinder completely failed a leak down test so I was looking at using a spare set of cylinders I have on the shelf. Didn’t realise they were pre 75 parts.
Thanks all!
Re: Push rod tube sizes and compatibility
Thus, you MAY also have a spigot size difference to deal with....