Just reading on Snowbums site about the earlier disk type...
There’s a clip position compressing the spring holding the disk in place... Why would the 75/6 and 75/5 use a different clip position? Shouldn’t they be the same setup?
(Can’t seem to attach an image)
If you like our site, please consider joining our club!
By joining you will help ensure that we can continue to provide this service
JOIN HERE!
By joining you will help ensure that we can continue to provide this service
JOIN HERE!
R75/6 oil breather valve disk type
-
schrader7032
- Posts: 9057
- Joined: Fri Oct 27, 2006 3:00 am
- Location: San Antonio, TX
- Has thanked: 3 times
- Been thanked: 36 times
Re: R75/6 oil breather valve disk type
My Haynes manual says the same thing. Must be something that the engineers figured out.
As for pictures, try reducing the size of the image on your computer before uploading. Shoot for a size of about 1Mb.
As for pictures, try reducing the size of the image on your computer before uploading. Shoot for a size of about 1Mb.
Kurt in S.A.
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.
Re: R75/6 oil breather valve disk type
That’s a little reassuring to know... especially if there’s multiple sources... thanks!schrader7032 wrote: ↑Mon Dec 07, 2020 10:51 amMy Haynes manual says the same thing. Must be something that the engineers figured out.
As for pictures, try reducing the size of the image on your computer before uploading. Shoot for a size of about 1Mb.