By joining you will help ensure that we can continue to provide this service
JOIN HERE!
uni-syn for bing carbs
uni-syn for bing carbs
- jwonder
- Posts: 784
- Joined: Wed Nov 23, 2016 7:50 pm
- Location: Long Island, New York
- Has thanked: 3 times
- Been thanked: 8 times
- Contact:
Re: uni-syn for bing carbs
The most important is understanding that by turning the adjustment plate you are adjusting the amount of pressure and the height of the air float. You want to match both sides on idle and then on part throttle. If part throttle is off you may need to go back to idle and start again. It’s an easy but tedious process. I typically adjust the float for the middle because it’s easier to read and match up. Your personal preference though.
Make sure the air float is vertical when using it. If I get a chance I will take a picture, but I am not home right now.
Vice President, Vintage BMW Motorcycle Owners
2022 BMW Friend Of the Marque
Long Island, New York
- jwonder
- Posts: 784
- Joined: Wed Nov 23, 2016 7:50 pm
- Location: Long Island, New York
- Has thanked: 3 times
- Been thanked: 8 times
- Contact:
Re: uni-syn for bing carbs
https://youtu.be/nh4OqKzuRvk
Vice President, Vintage BMW Motorcycle Owners
2022 BMW Friend Of the Marque
Long Island, New York
-
- Posts: 1298
- Joined: Wed Aug 05, 2009 9:06 pm
- Has thanked: 21 times
- Been thanked: 21 times
Re: uni-syn for bing carbs
R69S - R60/2 - R67/2 - R51/3 - R69