By joining you will help ensure that we can continue to provide this service
JOIN HERE!
R26 neutral switch alignment tool
- VintageJim
- Posts: 105
- Joined: Thu Oct 07, 2021 2:07 pm
- Location: Arizona
- Been thanked: 3 times
R26 neutral switch alignment tool
I have searched everywhere and can't find a tool for sale or the specifications. Does anyone have an alignment tool for sale or rent or have the specs so I could make one? Any help would be greatly appreciated!
Thanks!
Jim
Re: R26 neutral switch alignment tool
Sorry if you allready checked all that....
- VintageJim
- Posts: 105
- Joined: Thu Oct 07, 2021 2:07 pm
- Location: Arizona
- Been thanked: 3 times
Re: R26 neutral switch alignment tool
Re: R26 neutral switch alignment tool
- San Arthur
- Posts: 577
- Joined: Sun Apr 22, 2007 2:08 pm
- Location: San Antonio, TX.
- Has thanked: 1 time
- Contact:
Re: R26 neutral switch alignment tool
I don't remember a tool or anything in the Barrington about it, unless Vech knows about a tool.
Is just a copper connector that goes to ground, when the gear falls in neutral. I need to improve my technical english. hahahaha
In the picture above is the green wire connected to the center of the bucket warning lights.
Maybe the gearbox needs the frame to ground?
Maybe the copper connector is loose or bent like mine in the first picture?
I would start by grounding the warning lights on the bench and go from there, before opening the gear box cover, is a pita to shim into place.
Good luck.
'58 R26 '76 R90S '88 R100RS '94 R100GS/PD
- VintageJim
- Posts: 105
- Joined: Thu Oct 07, 2021 2:07 pm
- Location: Arizona
- Been thanked: 3 times
Re: R26 neutral switch alignment tool
- San Arthur
- Posts: 577
- Joined: Sun Apr 22, 2007 2:08 pm
- Location: San Antonio, TX.
- Has thanked: 1 time
- Contact:
Re: R26 neutral switch alignment tool
'58 R26 '76 R90S '88 R100RS '94 R100GS/PD
- VintageJim
- Posts: 105
- Joined: Thu Oct 07, 2021 2:07 pm
- Location: Arizona
- Been thanked: 3 times
Re: R26 neutral switch alignment tool
Thanks for all the comments!
Jim