By joining you will help ensure that we can continue to provide this service
JOIN HERE!
Wiring Question R69 Hi/lo Beam/Horn switch
Wiring Question R69 Hi/lo Beam/Horn switch
Thanks.
Re: Wiring Question R69 Hi/lo Beam/Horn switch
- schrader7032
- Posts: 9057
- Joined: Fri Oct 27, 2006 3:00 am
- Location: San Antonio, TX
- Has thanked: 3 times
- Been thanked: 36 times
Re: Wiring Question R69 Hi/lo Beam/Horn switch
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.
- wa1nca
- Posts: 1234
- Joined: Thu Sep 27, 2012 5:15 pm
- Location: Ashfield Ma
- Has thanked: 13 times
- Been thanked: 18 times
Re: Wiring Question R69 Hi/lo Beam/Horn switch
Bought the same switch from Kassic cycle
Push down and out on the high low button
Before you connect the wires insert the switch into the housing a few times to see how it fits
copy of nebseyer pic with wire placement
1- power for headlight #56 on ignition switch
2- headlight high beam
3-horn HO on ignition switch
4-headlight low beam
Note the h/l switch must be in the low position to insert the switch (opposite the position in this pic)
Tommy
54 R51/3, 55 R50/Velorex 560 sidecar, 64 R27, 68 R69US, 75 R75/6
Ashfield, Ma
USA
Re: Wiring Question R69 Hi/lo Beam/Horn switch
Thanks for the diagram Tommy . . .wa1nca wrote: ↑Sun Jun 06, 2021 1:06 pmJust did mine yesterday
Bought the same switch from Kassic cycle
Push down and out on the high low button
Before you connect the wires insert the switch into the housing a few times to see how it fits
DSC05344.JPG
copy of nebseyer pic with wire placement
1- power for headlight #56 on ignition switch
2- headlight high beam
3-horn HO on ignition switch
4-headlight low beam
Note the h/l switch must be in the low position to insert the switch (opposite the position in this pic)
Tommy
Is there a way to tell which wire is which from color-coding? I have a red wire (I assume power for headlight); a blue wire; a blue wire with a white stripe and a blue wire with a red stripe.
- wa1nca
- Posts: 1234
- Joined: Thu Sep 27, 2012 5:15 pm
- Location: Ashfield Ma
- Has thanked: 13 times
- Been thanked: 18 times
Re: Wiring Question R69 Hi/lo Beam/Horn switch
just look at the ignition switch board and see what wire is connected to #56 and connect it to #1 on your new switch
next see what color wire is connected to #HO on the ignition switch board and connect that to #3 on your new switch
then see what colors are connected to the headlight socket and connect them to #2 and #4 on your new switch
I wire mine for high beam when the switch is up and low beam when the switch is down
If they are backwards, just swap the 2 wires on the headlight socket
54 R51/3, 55 R50/Velorex 560 sidecar, 64 R27, 68 R69US, 75 R75/6
Ashfield, Ma
USA
- schrader7032
- Posts: 9057
- Joined: Fri Oct 27, 2006 3:00 am
- Location: San Antonio, TX
- Has thanked: 3 times
- Been thanked: 36 times
Re: Wiring Question R69 Hi/lo Beam/Horn switch
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.
- wa1nca
- Posts: 1234
- Joined: Thu Sep 27, 2012 5:15 pm
- Location: Ashfield Ma
- Has thanked: 13 times
- Been thanked: 18 times
Re: Wiring Question R69 Hi/lo Beam/Horn switch
Tommy
54 R51/3, 55 R50/Velorex 560 sidecar, 64 R27, 68 R69US, 75 R75/6
Ashfield, Ma
USA