If you like our site, please consider joining our club!
By joining you will help ensure that we can continue to provide this service
JOIN HERE!

R60us pinstriping on fenders

n8ozzy
Posts: 5
Joined: Sun May 23, 2021 5:13 pm
Location: Buellton, CA

R60us pinstriping on fenders

Post by n8ozzy »

Just curious about the bottom rear portions of these fenders. To me this bike looks like original paint, original fenders that are not cut but not quite sure what to make of the pinstriping. All r60s I've seen have had the pinstriping follow the curve of the bottom portion of the fender where as this bike the pinstriping ends at the bottom of the fender. Any thoughts?
Attachments
00707_2L0uamcwpfzz_0CI0t2_1200x900.jpg

User avatar
schrader7032
Posts: 9057
Joined: Fri Oct 27, 2006 3:00 am
Location: San Antonio, TX
Has thanked: 3 times
Been thanked: 36 times

Re: R60us pinstriping on fenders

Post by schrader7032 »

Welcome to the forum! Not a lot of R60US pictures I could find. But this one, which doesn't show all around the bottom, to me suggests that it does go all the way around. And yours has too sharp of an angle at the bottom, which seems like it's been modified.

http://www.bmbikes.co.uk/photos/photoph ... avudhi.jpg

More US bikes on this page:

https://bmwdean.com/slash2.htm
Kurt in S.A.
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.

Jim D 5112
Posts: 200
Joined: Fri Oct 27, 2006 3:00 am
Has thanked: 1 time

Re: R60us pinstriping on fenders

Post by Jim D 5112 »

My 69 R60 US striping follows the fender across the bottom and back up the other side. Original paint AMCA Winners Circle unrestored motorcycle.

User avatar
jwonder
Posts: 784
Joined: Wed Nov 23, 2016 7:50 pm
Location: Long Island, New York
Has thanked: 3 times
Been thanked: 8 times
Contact:

Re: R60us pinstriping on fenders

Post by jwonder »

The fenders are definitely bobbed at the bottom both front and rear. When I look at the I stripe it looks like it does not follow the edge very well and is a bit shaky. Original stripes were not like that and it makes me feel as if they were done afterwards. also the stripes on the tank look like they go too far forward on the tank.

Have you checked the archives to see if this was born as a diver white motorcycle or did it get repainted?

Hope this helps.
James Wonder
Vice President, Vintage BMW Motorcycle Owners
2022 BMW Friend Of the Marque
Long Island, New York

User avatar
miller6997
Posts: 1185
Joined: Fri Oct 27, 2006 3:00 am

Re: R60us pinstriping on fenders

Post by miller6997 »

If you search Google Images for 'BMW R60US' you will see a jillion pictures, not one of which shows the pinstripes terminating at the bottom of the fender as yours does. Your rear fender in particular looks to me like it has been bobbed. A previous owner must have thought it looked better that way. If you feel along the bottom edge, does it feel like it has been sawed off? It should be rounded, not sharp-edged.
Jon Miller
'67 R69S
'13 F800GT
Altadena, California

User avatar
schrader7032
Posts: 9057
Joined: Fri Oct 27, 2006 3:00 am
Location: San Antonio, TX
Has thanked: 3 times
Been thanked: 36 times

Re: R60us pinstriping on fenders

Post by schrader7032 »

Rear fender seems to have received the same treatment.
Kurt in S.A.
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.

n8ozzy
Posts: 5
Joined: Sun May 23, 2021 5:13 pm
Location: Buellton, CA

Re: R60us pinstriping on fenders

Post by n8ozzy »

Thank you all for the replies. So fenders have been bobbed. Bummer. How do I check the archives to see if this was born as a dover white model or repainted? What/who’s archives? That will be interesting to find out.

User avatar
schrader7032
Posts: 9057
Joined: Fri Oct 27, 2006 3:00 am
Location: San Antonio, TX
Has thanked: 3 times
Been thanked: 36 times

Re: R60us pinstriping on fenders

Post by schrader7032 »

You will need to send an email to the BMW archives and pass to them your bike's VIN and whatever you know about the bike. If they have something in their records they will email you back. Check out this post for one place to email:

viewtopic.php?p=76924#p76924
Kurt in S.A.
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.

User avatar
nebseyer
Posts: 89
Joined: Sun Nov 27, 2011 2:56 pm
Location: Southern California

Re: R60us pinstriping on fenders

Post by nebseyer »

IMG_0001.JPG
Here is a photo of a NOS 1969 R60US that was sold at auction a few years ago.

n8ozzy
Posts: 5
Joined: Sun May 23, 2021 5:13 pm
Location: Buellton, CA

Re: R60us pinstriping on fenders

Post by n8ozzy »

Thanks! Just sent an email to BMW archives.

Post Reply