By joining you will help ensure that we can continue to provide this service
JOIN HERE!
r60/2 rear fender hinge
-
- Posts: 29
- Joined: Wed Nov 16, 2016 11:55 pm
r60/2 rear fender hinge
I think I've seen someone just cut the plate out.
- schrader7032
- Posts: 9058
- Joined: Fri Oct 27, 2006 3:00 am
- Location: San Antonio, TX
- Has thanked: 3 times
- Been thanked: 36 times
Re: r60/2 rear fender hinge
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.
-
- Posts: 29
- Joined: Wed Nov 16, 2016 11:55 pm
- schrader7032
- Posts: 9058
- Joined: Fri Oct 27, 2006 3:00 am
- Location: San Antonio, TX
- Has thanked: 3 times
- Been thanked: 36 times
Re: r60/2 rear fender hinge
viewtopic.php?f=7&t=13760
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.
-
- Posts: 29
- Joined: Wed Nov 16, 2016 11:55 pm
Re: r60/2 rear fender hinge
- San Arthur
- Posts: 577
- Joined: Sun Apr 22, 2007 2:08 pm
- Location: San Antonio, TX.
- Has thanked: 1 time
- Contact:
Re: r60/2 rear fender hinge
'58 R26 '76 R90S '88 R100RS '94 R100GS/PD
-
- Posts: 29
- Joined: Wed Nov 16, 2016 11:55 pm
Re: r60/2 rear fender hinge
Here is the front piece, the hinge is worn.
Here is the underside of the front side, with the plate that covers the hinge piece. That is my main concern. I cannot see an easy way to remove the cover piece. I could just cut into it to access the hinge. I see that is what others have done. I would probably lose the bend in the cover piece.
-
- Posts: 200
- Joined: Fri Oct 27, 2006 3:00 am
- Has thanked: 1 time
Re: r60/2 rear fender hinge
- San Arthur
- Posts: 577
- Joined: Sun Apr 22, 2007 2:08 pm
- Location: San Antonio, TX.
- Has thanked: 1 time
- Contact:
Re: r60/2 rear fender hinge
If I understand correctly the middle part of the hinge is gone too, correct?
'58 R26 '76 R90S '88 R100RS '94 R100GS/PD
-
- Posts: 29
- Joined: Wed Nov 16, 2016 11:55 pm