By joining you will help ensure that we can continue to provide this service
JOIN HERE!
R12 generator problem
R12 generator problem
I restored d2b magneto/dynamo and have no current on the output wire .
armature ok ,new brushes. also repolarize with 6v battery.
what is the range of resistance for the two coil field?
- luca.stere
- Posts: 92
- Joined: Thu May 23, 2013 4:11 am
First you can test like this:
well I did this test with 6v
I think the problem is the coil .
I measured 6 ohms on DF and 2.9 on D+
- luca.stere
- Posts: 92
- Joined: Thu May 23, 2013 4:11 am
2.9 is not good, from what I
Have new field coil now
old coil was in very bad shape.
- Attachments
-
- 20181216_222115.jpg (736.51 KiB) Viewed 2608 times
-
- img_20190105_195156.jpg (982.73 KiB) Viewed 2608 times