By joining you will help ensure that we can continue to provide this service
JOIN HERE!
S Fairing installation
- San Arthur
- Posts: 577
- Joined: Sun Apr 22, 2007 2:08 pm
- Location: San Antonio, TX.
- Has thanked: 1 time
- Contact:
S Fairing installation
I decided to unistall the Talbot Berlin mirrors from my R90S and go back to original.
Following the instructions in the forum I unistall the faring and patch the holes left behind by the mirrors.
This bushing was installed into the faring, is listed as number 3 in the parts list. Do you know the part number? I went yesterday to the dealership and we attempt several ways to get the number from BMW but couldn´t.
And I have another question. Which one is correct position of the parts when installing the faring into the frame???
A.
Parts 9 and 7 go inside the fairing and 8 or 3 go in outside?
B.
6, 7, 8 and 9 go outside the fairing?
Or. C.
9, 7 and 8 go first and then 6, 4, 3 and 2? M I the only one or is this really confusing.
'58 R26 '76 R90S '88 R100RS '94 R100GS/PD
- schrader7032
- Posts: 9058
- Joined: Fri Oct 27, 2006 3:00 am
- Location: San Antonio, TX
- Has thanked: 3 times
- Been thanked: 36 times
Here's a different version of
- Attachments
-
- r90s_fairing_installation_english.pdf
- (1.44 MiB) Downloaded 68 times
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.
- San Arthur
- Posts: 577
- Joined: Sun Apr 22, 2007 2:08 pm
- Location: San Antonio, TX.
- Has thanked: 1 time
- Contact:
Describes only a single washer.
'58 R26 '76 R90S '88 R100RS '94 R100GS/PD