Vintage BMW Motorcycle Owners

Is it bent or is it just tilted? Maybe loosen a few bolts in the center, realign, and tighten??

Heat is needed in order to reduce or eliminate the work hardening that happens. When you bend something over and over, the metal becomes more brittle and prone to cracking...think what happens when you take a coat hanger and bend it back and forth...eventually it breaks. Heating or annealing helps t...

I didn't realize there was a "tool". Does the Barrington manual provide any help?

Are these Lester or Morris mags?

https://w6rec.com/wp-content/uploads/20 ... ories6.jpg

The old Bench Mark Works site lists this wheel seal...not sure if it's what you're talking about:

36314038155.1 substitute lip seal for inner wheel 038155 felt ring and 038157 cap R26R27

Bench Mark Works stock was taken over by Max BMW. I'd start there.

Thanks...I failed to see that little box!

Tommy -

Is the information given on the Salis page? I must be missing it.

Try searching the forum with "speedi sleeve". There are a few posts about that.

So does this confirm what you have in your hands? What are measurements for the 600cc engines?

Don't LED bulbs require some additional resistance in the circuit to work properly? The LED bulbs don't trigger the flashers because the small resistance isn't sensed by the flasher. What sort of changes did you have to make to the other LED sights you installed?