Tight front wheel
Posted: Wed Mar 27, 2024 2:46 pm
Hello,
Just moved back to PA from FL and having issues with 1973 R75/5 had since 2000.
Lubed brakes front end and when tighten spindle nut to over 20ftlb wheel won’t spin.
Was thinking need shims in bearing stack.
I am lost on bearing pre-load
I was thinking of taking it to a shop and have a pro rebuild.
Would like to hear what you folks think my issue is.
Thanks
John
Just moved back to PA from FL and having issues with 1973 R75/5 had since 2000.
Lubed brakes front end and when tighten spindle nut to over 20ftlb wheel won’t spin.
Was thinking need shims in bearing stack.
I am lost on bearing pre-load
I was thinking of taking it to a shop and have a pro rebuild.
Would like to hear what you folks think my issue is.
Thanks
John