/6 headlight relay question
Posted: Thu Jun 02, 2022 6:43 pm
I finally achieved a working headlight and switch…..however: after the low beam is on for 15 seconds or so, the relay starts buzzing; buzz goes away when I flash the high beam and then begins to buzz again when I un-flash the H/B.
First fix is order a new relay. On the way from Boxer2Valve. (First time order.)
My present relay, which is a Bosch, has a 30,85,86,87 and an 87B. I have other relays that are numbered 87 and 87; 87 and 87A….MY QUESTION IS: do 87A and 87B do the same thing in their respective relays./…..or do I HAVE to have an 87B terminal.
I tried a relay with an 87 and 87A. It didn’t work correctly….but might be no good.
Thanks.
First fix is order a new relay. On the way from Boxer2Valve. (First time order.)
My present relay, which is a Bosch, has a 30,85,86,87 and an 87B. I have other relays that are numbered 87 and 87; 87 and 87A….MY QUESTION IS: do 87A and 87B do the same thing in their respective relays./…..or do I HAVE to have an 87B terminal.
I tried a relay with an 87 and 87A. It didn’t work correctly….but might be no good.
Thanks.