Vintage BMW Motorcycle Owners

Is there a supplier for a replacement windshield for a standard 7 hole 20" wixom ranger?

Welcome to the forum! I replaced the one on my R69S because it was short...I wanted a taller one for a little more wind protection. I ended up buying one from Gustafsson Plastics:

https://bikescreen.com/index.html

It came undrilled which I first thought might be bummer, but I think it is good so that it can be matched exactly to what you have. They include a drill bit. One downside is that they have etched their logo into the lower corners of the windshield. At first I didn't like that, but I got over it pretty quick...I don't even notice them anymore.

I don't see it listed on the website...might have to give them a call.

Years ago I bought a screen for my Wixom fairing, made by Gustafson. I traced the shape on light cardboard so it is an easy matter to take a sheet of plexiglass and cut and drill holes to fit.

I hope this helps. You may know somebody with the proper screen and do it yourself.

I think I bought one from clearviewshields.com, but it was years ago and am not sure.

Wixom is not listed, so email or phone them.
I know for sure they didn't list my moto guzzi but had no problem making a decent replacement

I have used plexiglass in the past but it cracks easily and might result in daggers on impact.

Don

Wixom fairing (and Arthur Fulmer) is listed on this page:

https://bikescreen.com/pages/search-res ... tags=Wixom

Gustafsson Plastics which turns out to be bikescreen.com were really responsive, helpful and had just what I needed!