By joining you will help ensure that we can continue to provide this service
JOIN HERE!
Retouch or repaint?
- schrader7032
- Posts: 9056
- Joined: Fri Oct 27, 2006 3:00 am
- Location: San Antonio, TX
- Has thanked: 3 times
- Been thanked: 36 times
Re: Retouch or repaint?
What does Mark say about the part?
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.
- San Arthur
- Posts: 577
- Joined: Sun Apr 22, 2007 2:08 pm
- Location: San Antonio, TX.
- Has thanked: 1 time
- Contact:
Re: Retouch or repaint?
Vech and Blue Moon both have it. I will ask Richard I purchased from Bench Mark.schrader7032 wrote: ↑Sun Jul 05, 2020 7:08 pmThat's not a BMW part that I can tell...I plug it into RealOEM and it doesn't match anything. It's a Mark Huggett part probably...something that he has designed for the bike.
What does Mark say about the part?
'58 R26 '76 R90S '88 R100RS '94 R100GS/PD
- San Arthur
- Posts: 577
- Joined: Sun Apr 22, 2007 2:08 pm
- Location: San Antonio, TX.
- Has thanked: 1 time
- Contact:
Re: r26 hub
Kurt I found the answer, thanks Tommywa1nca wrote: ↑Sat Apr 25, 2020 8:59 amOh, and I do believe that the "hub cap" gets bolted on first, then the reverse top-hat, and then small hublet (my term). This allows the small hublet to stay stationary with the axle while the larger hub turns. If I remember it all correctly....
Hope this helps.
Tommy
'58 R26 '76 R90S '88 R100RS '94 R100GS/PD
- San Arthur
- Posts: 577
- Joined: Sun Apr 22, 2007 2:08 pm
- Location: San Antonio, TX.
- Has thanked: 1 time
- Contact:
Report from BMW about Zenaida
From: <info.grouparchiv@bmwgroup.com>
Subject: AW: R26 Information
Date: June 19, 2020 at 4:45:54 AM CDT
To: <san arthur>
Sehr geehrter Herr Ibarra,
vielen Dank für Ihre E-Mail.
Die BMW R 26 FIN 360775 wurde am 19.05.1958 produziert und am 10.07.1958 an den BMW Importeur Rowold in Mexico ausgeliefert. Die Maschinen war mit einer Sitzbank ausgestattet.
Wir hoffen, Ihnen damit weitergeholfen zu haben.
Mit freundlichen Grüßen
Andreas Harz
BMW Group
Andreas Harz
Archiv, Sammlung, Classic Brand Management
AK-50
Historischer Informationsdienst
Moosacher Str. 66
80809 München
Postanschrift:
80788 München
Tel: +49-89-382-68281
Fax: +49-89-382-24765
Web: http://www.bmwgroup.com
'58 R26 '76 R90S '88 R100RS '94 R100GS/PD
- San Arthur
- Posts: 577
- Joined: Sun Apr 22, 2007 2:08 pm
- Location: San Antonio, TX.
- Has thanked: 1 time
- Contact:
Parts almost ready
'58 R26 '76 R90S '88 R100RS '94 R100GS/PD
- waldoverkill
- Posts: 37
- Joined: Mon May 23, 2011 4:16 am
- Location: Auckland, New Zealand
Re: Parts almost ready
HiSan Arthur wrote: ↑Tue Jul 07, 2020 3:25 pmThis afternoon I scuffed the remaining Zanieda sheet metal using 600grit wet/dry paper. I will likely begin taping tomorrow. Then after taping the white stripes, I will spray the white paint and remove all that tape. Then the time will have come to spray clear coat.
Are you planning on masking for the pinstripes? Just my 2c, My tank was done this way and the rest of the bike is hand done. I really wish I had had the tank done by hand. The taped stripes on the tank are perfect but it does not look right.
- San Arthur
- Posts: 577
- Joined: Sun Apr 22, 2007 2:08 pm
- Location: San Antonio, TX.
- Has thanked: 1 time
- Contact:
Re: Parts almost ready
Everything started with me trying to clean the tank paint and here I'm, almost 4 years later wishing my tape pinstripes look good enough.waldoverkill wrote: ↑Tue Jul 07, 2020 7:42 pmHi
Are you planning on masking for the pinstripes? Just my 2c, My tank was done this way and the rest of the bike is hand done. I really wish I had had the tank done by hand. The taped stripes on the tank are perfect but it does not look right.
Hand paint never cross my mind, maybe next project. Thanks for your words.
'58 R26 '76 R90S '88 R100RS '94 R100GS/PD
- San Arthur
- Posts: 577
- Joined: Sun Apr 22, 2007 2:08 pm
- Location: San Antonio, TX.
- Has thanked: 1 time
- Contact:
White Lines
Ran into a problem with the white base coast paint on hand. It would not mix well and was a slight grey instead of pure white. It has been on the shelf to long I guess. I will be making a trip for paint. So, all the masking is done but I could not paint this day.
'58 R26 '76 R90S '88 R100RS '94 R100GS/PD
- San Arthur
- Posts: 577
- Joined: Sun Apr 22, 2007 2:08 pm
- Location: San Antonio, TX.
- Has thanked: 1 time
- Contact:
All parts taped.
'58 R26 '76 R90S '88 R100RS '94 R100GS/PD
- San Arthur
- Posts: 577
- Joined: Sun Apr 22, 2007 2:08 pm
- Location: San Antonio, TX.
- Has thanked: 1 time
- Contact:
Front wheel wobbling
Click_Image_for_Video
I had to move Zenaida out of the lift to make room for the GS but when I push it I felt the front wheel wobbling, side to side. I’m going to unmount it to check the hub and axle.
It was the small hub or dust cover. The hole was too narrow and wouldn’t let the axle push the wheel all the way inn against the brake.
I’m happy it was an easy solution, I thought it was the hub bearings.
'58 R26 '76 R90S '88 R100RS '94 R100GS/PD