1975 BMW R60/6, foot peg rubber covers removal

Post Reply
motaman38
Posts: 19
Joined: Thu Aug 31, 2017 10:20 pm

1975 BMW R60/6, foot peg rubber covers removal

Post by motaman38 »

Hi,

I am trying to pry off the driver and passenger rubber covers from the footpegs, and this
is proving to be difficult. Should they be cut off? Please advise?

Motaman
Motaman

User avatar
schrader7032
Posts: 7189
Joined: Fri Oct 27, 2006 3:00 am

For handlebars, I've heard of

Post by schrader7032 »

For handlebars, I've heard of people using an air hose to force it between the grip and the bars. Might work on a footpeg. If you're replacing them anyway, just use a sharp Exacto knife to cut them off lengthwise.
Kurt in S.A.
'78 R100/7 '69 R69S '52 R25/2

MikeL46
Posts: 99
Joined: Fri Jan 01, 2016 1:58 pm

As Kurt said; if you are

Post by MikeL46 »

As Kurt said; if you are replacing them, just cut them off.
OTOH if you want to reuse them, it is easier to remove the whole footpeg.

Mike
67 R50/2 w/R100 engine/trans and Ural Sidecar
69 R60/2 76 R90S 78 R100RS
70 Triumph w/Spirit Eagle Sidecar

Post Reply