By joining you will help ensure that we can continue to provide this service
JOIN HERE!
Front Air Pump "holder" 1956 R50 (Finished Product)
- schrader7032
- Posts: 9052
- Joined: Fri Oct 27, 2006 3:00 am
- Location: San Antonio, TX
- Has thanked: 3 times
- Been thanked: 36 times
Some helpful info
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.
Pump holder
- Attachments
-
- img_1008.jpg (123.81 KiB) Viewed 1606 times
-
- img_1009.jpg (70.79 KiB) Viewed 1606 times
-
- img_1010.jpg (77.72 KiB) Viewed 1606 times
-
- img_1011.jpg (59.79 KiB) Viewed 1606 times
-
- img_1012.jpg (104.94 KiB) Viewed 1606 times
1956 R69, 1976 R90S, 2008 R1200GS
Finished pump holder replacement
Here she is....
8 mm x 1.25 steel bolt
17/64 drill
8 x 1.25 tap
I measured and cut the bolt, spun in a drill against a grinder to make the rounded end
Heat with a MAPP torch and bent
Looks great.
Thanks for the help!
- Attachments
-
- img_4593.jpg (1.76 MiB) Viewed 1606 times
Front Air Pump "holder" 1956 R50 (Finished Product)
My 1956 R50 frame has the front "L" shaped piece that holds the air pump on broken off. I would like to have one welded on before repainting the frame- Does someone mind measuring the diameter and length of the piece. Thanks!
If you are not trying to win
Looks good.
1969 BMW r60/2, US Model, 1995 BMW K75, 2006 Yamaha TW200, 2007 Ural Patrol, 1991 Honda XR250L