By joining you will help ensure that we can continue to provide this service
JOIN HERE!
Retouch or repaint?
- San Arthur
- Posts: 577
- Joined: Sun Apr 22, 2007 2:08 pm
- Location: San Antonio, TX.
- Has thanked: 1 time
- Contact:
Front Shocks Update
And is ready to be installed.
'58 R26 '76 R90S '88 R100RS '94 R100GS/PD
- San Arthur
- Posts: 577
- Joined: Sun Apr 22, 2007 2:08 pm
- Location: San Antonio, TX.
- Has thanked: 1 time
- Contact:
Do you tell your wife?
'58 R26 '76 R90S '88 R100RS '94 R100GS/PD
- San Arthur
- Posts: 577
- Joined: Sun Apr 22, 2007 2:08 pm
- Location: San Antonio, TX.
- Has thanked: 1 time
- Contact:
First wheel for alignment
It was fun to lace the wheel. I will align it next week at the shop.
Click on Rim for time lapse film. Thanks
'58 R26 '76 R90S '88 R100RS '94 R100GS/PD
- malmac
- Posts: 796
- Joined: Sun Jun 29, 2014 2:10 am
- Location: Toowoomba, Australia.
- Has thanked: 1 time
now thats a good idea
No.
Too bad.
Mal
Toowoomba- Australia
- San Arthur
- Posts: 577
- Joined: Sun Apr 22, 2007 2:08 pm
- Location: San Antonio, TX.
- Has thanked: 1 time
- Contact:
Household Motorcycle Parts Washer
No.
Too bad.
Mal
Did you?
'58 R26 '76 R90S '88 R100RS '94 R100GS/PD
- San Arthur
- Posts: 577
- Joined: Sun Apr 22, 2007 2:08 pm
- Location: San Antonio, TX.
- Has thanked: 1 time
- Contact:
Problem solved.
I´m still wandering why Huggett has two of them?
I´m still waiting to receive the correct “wedding ring” from Vech so I can put together the front hub and wheel.
'58 R26 '76 R90S '88 R100RS '94 R100GS/PD
- wa1nca
- Posts: 1231
- Joined: Thu Sep 27, 2012 5:15 pm
- Location: Ashfield Ma
- Has thanked: 12 times
- Been thanked: 18 times
r26 top hat
The second one is correct for R26-R27
Salis breakdown looks like your second one as shown
https://www.bmwclassicmotorcycles.com/p ... hub-brake/
Zenaida's looks great !!
Tommy
54 R51/3, 55 R50/Velorex 560 sidecar, 64 R27, 68 R69US, 75 R75/6
Ashfield, Ma
USA
- San Arthur
- Posts: 577
- Joined: Sun Apr 22, 2007 2:08 pm
- Location: San Antonio, TX.
- Has thanked: 1 time
- Contact:
Huggett
The second one is correct for R26-R27
Salis breakdown looks like your second one as shown
https://www.bmwclassicmotorcycles.com/p ... hub-brake/
Zenaida's looks great !!
Tommy
The Huggett's parts breakdown is for R24-R25/3
The second one is correct for R26-R27
Salis breakdown looks like your second one as shown
https://www.bmwclassicmotorcycles.com/p ... hub-brake/
Zenaida's looks great !!
Tommy
Thanks Tommy
You are right and Mark Huggett answer my question too. Is 1 (one) per wheel.
From: "huggett@bmwbike.com"
Subject: Re: Halle
Date: June 18, 2020 at 11:16:53 AM CDT
To: Arturo Ibarra
Dear Mr. Ibarra.
Thank you for your e-mail.
That is two sleeves per motorcycle or two wheels. That means one per wheel. The R26 and R27 only use the sleeve 36 31 4 038 142 on the right hand side.
The R26 and R27 use the sleeve 36 31 4 038 143 on the left hand side in conjunction with the rain cover 34 11 2 060 170.
The diagram is for 3 models namely R25/3; R26 and R27. What is important for you is to check the quantities.
If I install 2 sleeves there is no room for the washer and hex nut at the end of the axle shaft.
Correct. That is why the quantity defined for both wheels in total is “2” and not “4”.
Simply remove the 36 31 4 038 142 from the left hand side and every thing will fit again.
Yours sincerely,
Mark Huggett
'58 R26 '76 R90S '88 R100RS '94 R100GS/PD
-
- Posts: 71
- Joined: Fri Oct 27, 2006 3:00 am
- Been thanked: 1 time
Re: Retouch or repaint?
President, VBMWO
- San Arthur
- Posts: 577
- Joined: Sun Apr 22, 2007 2:08 pm
- Location: San Antonio, TX.
- Has thanked: 1 time
- Contact:
Re: Retouch or repaint?
Thanks Mac, we do what we can with the pandemic. Congratulations on the webpage.kirkpatrick3890 wrote: ↑Mon Jun 29, 2020 9:57 amHi Arturo, I found you. You are doing a great job! Congratulations.
San Arthur
'58 R26 '76 R90S '88 R100RS '94 R100GS/PD