Found out the hard way that even one pair of filthy carbs can foul Berryman's Carb Cleaner (dip can) badly enough to foul the next carbs. Did a filthy pair, followed by a fairly clean pair and the latter pair had the idle jets plug and other surfaces fouled to the point the slides would bind. Had to go back with spray carb cleaner, jet reamer, and thoroughly wiping surfaces free of fouling residue.
Will dispose of the fouled cleaner rather than fiddle with filtering it etc.
Might invest in an ultrasonic cleaner...
If you like our site, please consider joining our club!
By joining you will help ensure that we can continue to provide this service
JOIN HERE!
By joining you will help ensure that we can continue to provide this service
JOIN HERE!
Carburetor cleaning
Re: Carburetor cleaning
'73 R75/5; ‘84 R100S Last Edition (California version); ‘84 R100RS; ‘08 R1200RT
-
mcsherry1328
- Posts: 311
- Joined: Fri Oct 27, 2006 3:00 am
- Has thanked: 29 times
- Been thanked: 22 times
Re: Carburetor cleaning
I had a very similar experience. Then I recently bought a 6 litre ultra sonic cleaner from Harbor Freight. Very pleased with this new cleaning unit. Price $179. I also ordered some aircraft quality Simple Green Pro as a cleaning solution.
-
Goro F
- Posts: 126
- Joined: Tue May 23, 2023 8:35 am
- Location: Italy
- Has thanked: 13 times
- Been thanked: 4 times
Re: Carburetor cleaning
look at this
https://www.youtube.com/watch?v=UzZaaH4fXL0
i tried on the housing of carburettors and it work perfectly
https://www.youtube.com/watch?v=UzZaaH4fXL0
i tried on the housing of carburettors and it work perfectly
-
mcsherry1328
- Posts: 311
- Joined: Fri Oct 27, 2006 3:00 am
- Has thanked: 29 times
- Been thanked: 22 times
Re: Carburetor cleaning
New way to annoy the wife, thanks.
75/7+ offroad sidecar; 50/2; R 35; XR125V; XR200A; Solex; 1939 Hillman Minx DHC.