If you like our site, please consider joining our club!
By joining you will help ensure that we can continue to provide this service
JOIN HERE!

1938 r51

Jussns
Posts: 19
Joined: Mon Dec 11, 2017 3:40 pm

The same story is my front

Post by Jussns »

The same story is my front fork lower part.
Does enyone need to excange it or sell original postwar part?

Aarne
Attachments
d0224357-689e-4907-8e0d-1bd680be3424.jpeg
d0224357-689e-4907-8e0d-1bd680be3424.jpeg (1.85 MiB) Viewed 4819 times

Jussns
Posts: 19
Joined: Mon Dec 11, 2017 3:40 pm

Fork detail

Post by Jussns »

The same story is my front fork lower part.
Does enyone need to excange it or sell original postwar part?

Aarne
The same story is my front fork lower part.
Does enyone need to excange it or sell original postwar part?

Aarne

Lilltle mistake,I need pre war lower part.

User avatar
ogre
Posts: 45
Joined: Sat Mar 28, 2015 4:35 am

bmw r5 parts

Post by ogre »

Hi,
What kind of r5 parts do you have?

I might have gearbox case :)

lui
Posts: 20
Joined: Sun Mar 13, 2016 11:04 am

hello ,igot a gearbox house

Post by lui »

hello ,igot a gearbox house to swap if you interesting.regards
Attachments
sam_7121.jpg
sam_7121.jpg (420.48 KiB) Viewed 4819 times
sam_7124.jpg
sam_7124.jpg (370.6 KiB) Viewed 4819 times
sam_7122.jpg
sam_7122.jpg (377.26 KiB) Viewed 4819 times
sam_7123.jpg
sam_7123.jpg (354.29 KiB) Viewed 4819 times

Jussns
Posts: 19
Joined: Mon Dec 11, 2017 3:40 pm

Hello Lui ! Is there are

Post by Jussns »

Hello Lui !

Is there are screw hole on the right side in the airfilter ring? I think r51 dont have this hole there?


Kind regards

User avatar
ogre
Posts: 45
Joined: Sat Mar 28, 2015 4:35 am

Hi, will send pictures

Post by ogre »

Hi, will send pictures tomorrow but mine is cutted aswell :/ any way might good for you.

That hole for airfilter screw is correct on left hand side. Lui great pictures by the way :P

My R51 1939 got light switch on left hand side.


Jussns
Posts: 19
Joined: Mon Dec 11, 2017 3:40 pm

Valve covers

Post by Jussns »

Hi!

I have a two differnt typs valve covers,both are same part nr but on cover is m16 breather nut hole and one is m12(its seems original). Is this m12 hole cover are r66 ore what?

Kind regards
Attachments
af0dfcdd-1e33-420f-99fc-c9ca431bcdf0.jpeg
af0dfcdd-1e33-420f-99fc-c9ca431bcdf0.jpeg (2.02 MiB) Viewed 4819 times
cebb95c4-d494-43d6-8361-59ddff252cb1.jpeg
cebb95c4-d494-43d6-8361-59ddff252cb1.jpeg (2 MiB) Viewed 4819 times
08f28e6e-e748-4c82-856e-6024d3fbfcba.jpeg
08f28e6e-e748-4c82-856e-6024d3fbfcba.jpeg (1.93 MiB) Viewed 4819 times

User avatar
bm68andreas
Posts: 42
Joined: Thu Jan 01, 2015 3:21 pm

The one with the small hole

Post by bm68andreas »

The one with the small hole is from an R5 and the other one is from an R51 or R66.
[iKONTOGIANIS][/i]

Jussns
Posts: 19
Joined: Mon Dec 11, 2017 3:40 pm

Hi! Thank you for replay! Now

Post by Jussns »

Hi!

Thank you for replay!
Now I have a problem with one cover,I have breathern nuts with m16 and its not correct to modificate r5 cover.


Regards

Jussns
Posts: 19
Joined: Mon Dec 11, 2017 3:40 pm

I see that my engine case is

Post by Jussns »

I see that my engine case is marked some kind of stamp and nr “12”
Does it mean something,or its nothing?
it is located right side engine,near of oil pump shaft hole.

Regards
Attachments
ccaa5038-0306-4608-b2e2-7733cae45ebf.png
ccaa5038-0306-4608-b2e2-7733cae45ebf.png (1.54 MiB) Viewed 4819 times
828f33f3-4ba6-4284-a5db-ee09a3d48a17.jpeg
828f33f3-4ba6-4284-a5db-ee09a3d48a17.jpeg (2.5 MiB) Viewed 4819 times

Post Reply