If you like our site, please consider joining our club!
By joining you will help ensure that we can continue to provide this service
JOIN HERE!

*Update #2 *gear selector linkage rod

SDCR
Posts: 132
Joined: Sat Mar 05, 2022 7:50 am

Re: *Update #2 *gear selector linkage rod

Post by SDCR »

schrader7032 wrote:
Wed Feb 08, 2023 2:00 pm
Have you measured the differences? A digital caliper could tell you how much you have to remove to get things to fit.
Kurt,
No, I don’t have one of those.
1983 R100
2000 R1100

SDCR
Posts: 132
Joined: Sat Mar 05, 2022 7:50 am

Re: *Update Feb. 26. *gear selector linkage rod

Post by SDCR »

Finally got around to adding the ball and socket shifter linkage. Initially, I found the shifter holes too small, to fit the threaded component.
So, after carefully drilling the bore, slightly larger, I was able to thread the ball and socket parts into place. Looks Ok, will take it for a run this week.
0180D406-AABE-4827-8524-CB4CFE52F7A4.jpeg
49E8F71F-27F6-4787-9852-6FC582EBBCE9.jpeg
1983 R100
2000 R1100

Post Reply