By joining you will help ensure that we can continue to provide this service
JOIN HERE!
96 R100GSPD Crankshaft timing sprocket removal/refit
96 R100GSPD Crankshaft timing sprocket removal/refit
I'm currently in process of camshaft replacement on my '96 GSPD and wondering if it's possible to refit the Crankshaft Timing Sprocket and Nose Bearing without having to use the Cycleworks Front of Engine Kit. It is a bit of a sticking point to drop close to $200 USD for a tool i will hopefully only have to ever use once.
If anyone has made a tool from a length of 6mm threaded bar with the appropriate washers i'd love to hear if you can get enough force to press the sprocket and bearing back on with success.
Thankyou Graeme.
1996 R100GSPD
1999 R1100S
2020 R1250GSA
- schrader7032
- Posts: 9053
- Joined: Fri Oct 27, 2006 3:00 am
- Location: San Antonio, TX
- Has thanked: 3 times
- Been thanked: 36 times
Re: 96 R100GSPD Crankshaft timing sprocket removal/refit
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.
Re: 96 R100GSPD Crankshaft timing sprocket removal/refit
I'm in Australia and my airhead network is quite small unfortunately.
I'll most likely bite the bullet and order the tool required to do the refit correctly.
Cheers Graeme
1996 R100GSPD
1999 R1100S
2020 R1250GSA
- schrader7032
- Posts: 9053
- Joined: Fri Oct 27, 2006 3:00 am
- Location: San Antonio, TX
- Has thanked: 3 times
- Been thanked: 36 times
Re: 96 R100GSPD Crankshaft timing sprocket removal/refit
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.
Re: 96 R100GSPD Crankshaft timing sprocket removal/refit
Regards Graeme
1996 R100GSPD
1999 R1100S
2020 R1250GSA
Re: 96 R100GSPD Crankshaft timing sprocket removal/refit
Good Luck
Chris
Seattle