Cylinder/engine gasket R60/5

Post Reply
norwaybike
Posts: 37
Joined: Fri Jan 26, 2007 3:44 pm

Cylinder/engine gasket R60/5

Post by norwaybike »

Hi!

I am putting on new cylinders on my R60/5. It is a alu gasket between the engine block and the cylinder foot. Du you recommend to use some thin siligasket on tube together with the alugasket??
Carefully around the holes for the oil on the yop bolts of course. Or only use the alugasket?

Best regards Frode

User avatar
schrader7032
Posts: 7137
Joined: Fri Oct 27, 2006 3:00 am

Re: Cylinder/engine gasket R60/5

Post by schrader7032 »

I think yes to all that. The sealant you would use is a non-hardening type like Hylomar or Permatex Ultragray.

There is a thicker base gasket that can be used to reduce the tendency for the R60/5 (and other 600cc) to ping. The engine had high compression and the mild cam profile tended to create a situation where the bike would ping.
Kurt in S.A.
'78 R100/7 '69 R69S '52 R25/2

Post Reply