By joining you will help ensure that we can continue to provide this service
JOIN HERE!
51/3 Carburettors on a 60/2 ?
- schrader7032
- Posts: 9056
- Joined: Fri Oct 27, 2006 3:00 am
- Location: San Antonio, TX
- Has thanked: 3 times
- Been thanked: 36 times
51/3 Carburettors on a 60/2 ?
http://www.flickr.com/photos/roundel/66174400/
The #45 shows as being used on an R50 or an R50/2 while the #126 was used on R60/2. So, it would appear that these carbs would fit on an R60/2, possibly with some jetting changes. They're 24mm in the throat which is what the R60/2 originally came with. 24mm carbs were also used on the R51/3 but it doesn't look like it was those numbers.
Kurt in S.A.
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.
51/3 Carburettors on a 60/2 ?
51/3 Carburettors on a 60/2 ?
Bing Vergaser 1/24/45 BMW R51/2 R51/3 R67 R67/2 R50 R60 (left side)
Bing Vergaser 1/24/126 BMW R51/2 R51/3 R67 R67/2 R50 R60 (right side)
According to the seller, these were originally fitted on a 51/3. Will they fit on a 1965 R60/2?