By joining you will help ensure that we can continue to provide this service
JOIN HERE!
Information regarding BMW tools:
- Darryl.Richman
- Posts: 2135
- Joined: Fri Oct 27, 2006 3:00 am
- Has thanked: 1 time
- Been thanked: 7 times
Try this link, or look at the
http://www.beemergarage.com/documents/tools368.pdf
- Rodolfo850
- Posts: 65
- Joined: Sun May 29, 2011 11:05 pm
- Location: Guatemala, Central America
- Has thanked: 1 time
- Been thanked: 1 time
Tools designs on PDF?
Did you still have the PDF file with MAtra tools catalog and engineering design??
Could you send me a copy to my email ? rcastillo244@gmail.com
kind regards
Rodolfo
- malmac
- Posts: 796
- Joined: Sun Jun 29, 2014 2:10 am
- Location: Toowoomba, Australia.
- Has thanked: 1 time
I would like a copy of the drawings if possible please
I have been making a set of tool for my son and my 2 pre 1970's bikes -
At the moment I am working on the rear crankshaft main bearing puller - this is a tricky one and I still have a fair way to go to nail it.
A copy of the tech drawings would be very handy.
Regards
Mal mal@malmac.net
Attached is the puller I constructed to pull the camshaft timing gear off the camshaft.
What was required was to machine down some suitable length bolts so they would fit through the timing gear existing holes and also fit between the arms of the Sykes/Pikavant puller arms.
- Attachments
-
- img_2436.jpg (367.6 KiB) Viewed 2295 times
Toowoomba- Australia
-
- Posts: 1274
- Joined: Wed Aug 05, 2009 9:06 pm
- Has thanked: 9 times
- Been thanked: 12 times
That is a cool tool setup.
R69S - R60/2 - R67/2 - R51/3 - R69
- malmac
- Posts: 796
- Joined: Sun Jun 29, 2014 2:10 am
- Location: Toowoomba, Australia.
- Has thanked: 1 time
You are right
Mal
Toowoomba- Australia
-
- Posts: 141
- Joined: Fri Oct 27, 2006 3:00 am
tools
-
- Posts: 307
- Joined: Mon Jan 03, 2011 10:12 am
What are
-
- Posts: 141
- Joined: Fri Oct 27, 2006 3:00 am
tools
-
- Posts: 141
- Joined: Fri Oct 27, 2006 3:00 am
copies
jim... jimstravlin@hotmail.com
www.airheadrestorations.com
-
- Posts: 307
- Joined: Mon Jan 03, 2011 10:12 am