Just saw this same discussion on the Yahoo /2 list. The suggestion was to check with Bing if you want a sleeve to be installed onto existing slides. Otherwise, if you want to increase the bore to fit existing slides, maybe a decent machine shop could do that.
If you like our site, please consider joining our club!
By joining you will help ensure that we can continue to provide this service
JOIN HERE!
By joining you will help ensure that we can continue to provide this service
JOIN HERE!
Re-sleeving the Bing carburetor:
-
schrader7032
- Posts: 9040
- Joined: Fri Oct 27, 2006 3:00 am
- Location: San Antonio, TX
- Has thanked: 2 times
- Been thanked: 34 times
Just saw this same discussion
Kurt in S.A.
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.
-
schrader7032
- Posts: 9040
- Joined: Fri Oct 27, 2006 3:00 am
- Location: San Antonio, TX
- Has thanked: 2 times
- Been thanked: 34 times
Update
Some more notes from the Yahoo list...it seems that Bruce is still taking some work, but only after he's considered it. If Bruce cannot do the work, consider checking with Dan at Cycleworks. Dan has indicating he'd help where he could, depending on what needs to be done. Dan's at http://www.cycleworks.net.
Kurt in S.A.
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.