By joining you will help ensure that we can continue to provide this service
JOIN HERE!
R60/2 crankshaft removal
R60/2 crankshaft removal
Thanks in advance.
- jwonder
- Posts: 784
- Joined: Wed Nov 23, 2016 7:50 pm
- Location: Long Island, New York
- Has thanked: 3 times
- Been thanked: 7 times
- Contact:
Re: R60/2 crankshaft removal
Buy all new engine bearings.
Vice President, Vintage BMW Motorcycle Owners
2022 BMW Friend Of the Marque
Long Island, New York
Re: R60/2 crankshaft removal
- vechorik1373
- Posts: 260
- Joined: Fri Oct 27, 2006 3:00 am
- Been thanked: 15 times
Re: R60/2 crankshaft removal
The only difference in the two bearings is that the brass cage bearing is rated at a higher RPM.
This RPM is much higher than the engine can ever reach. And supposedly, it will run quieter, but I cannot hear or confirm any difference.
There is nothing wrong with using the steel cage 6207. It will work fine. and it is cheaper
Technical Adviser, Former owner, Bench Mark Works
662 312 2838 cell 9 am to 4pm CST PLEASE!