By joining you will help ensure that we can continue to provide this service
JOIN HERE!
Bar End Flasher 6V FESTOON LED
-
- Posts: 60
- Joined: Mon May 09, 2022 9:28 am
Bar End Flasher 6V FESTOON LED
https://vintagebeemerparts.com/new-vint ... stoon-led/
https://vintagebeemerparts.com/new-vint ... 8-654-131/
https://vintagebeemerparts.com/bmw-6-vo ... 9-978-006/
2013 R1200GS
- schrader7032
- Posts: 9056
- Joined: Fri Oct 27, 2006 3:00 am
- Location: San Antonio, TX
- Has thanked: 3 times
- Been thanked: 36 times
Re: Bar End Flasher 6V FESTOON LED
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.
-
- Posts: 60
- Joined: Mon May 09, 2022 9:28 am
Re: Bar End Flasher 6V FESTOON LED
Paul
2013 R1200GS
- jwonder
- Posts: 784
- Joined: Wed Nov 23, 2016 7:50 pm
- Location: Long Island, New York
- Has thanked: 3 times
- Been thanked: 8 times
- Contact:
Re: Bar End Flasher 6V FESTOON LED
Vice President, Vintage BMW Motorcycle Owners
2022 BMW Friend Of the Marque
Long Island, New York
-
- Posts: 60
- Joined: Mon May 09, 2022 9:28 am
Re: Bar End Flasher 6V FESTOON LED
2013 R1200GS
Re: Bar End Flasher 6V FESTOON LED
Re: Bar End Flasher 6V FESTOON LED
https://www.mikesxs.net/sparck-moto-uni ... relay.html
It's two prong, no ground wire. My bike has a 12 V conversion, but this works on either 6 or 12V. It is polarity sensitive, I had to switch the leads around to make it work.
For those running 12 V, I used these LED bulbs , which are rated at 400 lumens, and brighter than heck:
https://www.amazon.com/dp/B08XR2RG5G?re ... tails&th=1
Unfortunately they are not rated for 6V but no doubt similar alternatives are out there. Like all LEDs you have to check the polarity before installing, by just using a couple of test leads
With this setup the bar ends actually become useful daytime turn signals!
Adam
Re: Bar End Flasher 6V FESTOON LED
Re: Bar End Flasher 6V FESTOON LED
Adam