By joining you will help ensure that we can continue to provide this service
JOIN HERE!
Idling and vibration R69 1956
-
- Posts: 11
- Joined: Mon Nov 21, 2022 12:50 pm
Idling and vibration R69 1956
- schrader7032
- Posts: 9050
- Joined: Fri Oct 27, 2006 3:00 am
- Location: San Antonio, TX
- Has thanked: 3 times
- Been thanked: 34 times
Re: Idling and vibration R69 1956
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.
-
- Posts: 11
- Joined: Mon Nov 21, 2022 12:50 pm
Re: Idling and vibration R69 1956
- bm68andreas
- Posts: 42
- Joined: Thu Jan 01, 2015 3:21 pm
-
- Posts: 11
- Joined: Mon Nov 21, 2022 12:50 pm
Re: Idling and vibration R69 1956
- schrader7032
- Posts: 9050
- Joined: Fri Oct 27, 2006 3:00 am
- Location: San Antonio, TX
- Has thanked: 3 times
- Been thanked: 34 times
Re: Idling and vibration R69 1956
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.
-
- Posts: 11
- Joined: Mon Nov 21, 2022 12:50 pm
Re: Idling and vibration R69 1956
Re: Idling and vibration R69 1956
start engine.
Pull left spark plug cable. observe for a second to 2
pull right cable. observe.
If the engine shakes at idle, the engine should stall on one one side or the other.
Turn up the screw that raises the slide on the carb that stalled would be the first experiment.
Also look into the throat of the carbs. I had a rough idle episode when the steel insert in one carb pushed up out of the aluminum body
All on the road, going no where in particular in the Finger Lakes of New York
-
- Posts: 1293
- Joined: Wed Aug 05, 2009 9:06 pm
- Has thanked: 18 times
- Been thanked: 16 times
-
- Posts: 11
- Joined: Mon Nov 21, 2022 12:50 pm